The LTHS3  is a 3-axis stage (X, Y, Z) with a motion range up to 75µm along X and Y and up to 50µm along Z. Because of its very low profile (21.5mm), this nanopositioner is easy to integrate into inverted microscopes, most of the time together with a coarse positioning Microstage (See our Hybrid System).

This nanopositioner is part of our high-speed product line (High power controller available).

  • Features :

    • Ultra high speed
    • Direct drive
    • Square aperture (66 x 66 mm)
    • 75 µm X, Y motion, 50µm Z motion
    • Closed loop control
    • Silicon sensor technology
    • Less than 10pm noise floor

    Applications :

    • Super resolution microscopy
    • Fast XY scanning
    • Particle tracking
    • Confocal microscopy
    • Atomic Force Microscopy
    • Optical tweezer
  • 3 axis Controller PRIO3 Axis Controller
    Our 3 axis PiezoStage will be used with a 3 axis controller standard or high speed
    MANUAL-STAGE+LTHS-2Hybrid system
    The LTHS3 can be proposed with a coarse positioning stage
    SH-LIGHT-SLIDELight Sample Holders
    See the different Light Sample holders available for the LTHS3
    Adaptation plate for 160x110 apertureAdapter Plate
    This adapter plate allows to mount the LTHS3 on a stages with K-type frame (160mm x 110mm aperture)
  • downloadTechnical Drawing
    LTHS3 Piezostage dimensions
    PDF -
    59 Ko

 XY Specifications 
Range of motion X Y305075µm
Resolution X Y0.030.050.075nm
Typical noise floor X Y0.0030.0050.0075nm
Full range repeatability X Y0.060.10.15nm
Linearization X Y (typical)0.02%
Resonant frequency X / Y1500 / 1000Hz
Stiffness X / Y4 / 3N/µm

 Z Specifications 
Range of motion Z2550µm
Resolution Z0.0250.05nm
Typical noise floor Z0.00250.005nm
Full range repeatability Z0.050.1nm
Linearization Z (typical)0.02%
Resonant frequency Z1500Hz
Stiffness Z3N/µm

 General Specifications 
Maximum load* :
- horizontal use1kg
- vertical use0.5kg
SensorSilicon HR sensor
Size W x L x H190 x 152.5 x 21.5mm
Cable length**2m
ControllerHigh Speed

LTHS3.XX.xx :
XX : 30, 50 or 75 according to range of motion of X Y axis
xx : 25 or 50 according to range of motion of Z axis

* Higher load on request
**Higher length on request

EUROPE : 9:00 am - 6:30 pm
USA : 7:00 am - 4:00 pm (CST)

Advices & after-sales service

Demo product on request