The LT2 is a 2-axis stage (X, Y) with a travel range of  100μm, 200µm or 300µm for each axis. Because of its very low profile (15.5mm), this nanopositioner is easy to integrate into inverted microscopes and can be combined with a coarse positioning stage (See our Hybrid System).

The standard LT2 is made in aluminium but for Bruker AFM upgrade, the LT2.100 (100µm version) is available in Invar which allows  higher thermal stability.


  • Features :

    • Low profile
    • Square aperture (66 x 66 mm)
    • 100, 200 or 300 µm motion
    • Closed loop control
    • Silicon sensor technology
    • Less than 30pm noise floor

    Applications :

    • Super Resolution microscopy
    • Nanolithography
    • Particle tracking
    • Confocal microscopy
    • Atomic Force Microscopy
    • Bruker AFM upgrade
  • 2 axis Controller2 Axis Controller
    Our 2 axis PiezoStage will be used with a 2 axis controller standard or high speed
    MANUAL-STAGE+LT-2Hybrid system
    The LT2 can be proposed with a coarse positioning stage
    SH-BOT-SQUARE-LABTEKSquare Sample Holders
    See the different Square Sample holders available for the LT2
    Adaptation plate for 160x110 apertureAdapter Plate
    This adapter plate allows to mount the LT2 on a stages with K-type frame (160mm x 110mm aperture)
  • downloadTechnical Drawing
    LT2 Piezostage dimensions
    PDF -
    23,8 Ko
    downloadPiezoConcept Datasheet
    Complet datasheet with variable travel range, specifications, dimensions ...
    PDF -
    143 Ko

Range of motion100200300µm
Typical noise floor0.010.020.03nm
Full range repeatability0.20.40.6nm
Resonant frequency X/Y500/400400/350300/250Hz
Stiffness X/Y0.6/0.50.5/0.40.4/0.3N/µm
Maximum Load* :
- horizontal use1kg
- vertical use0.5kg
SensorSilicon HR sensor
Size W x L x H155.5 x 152.5 x 15.6mm
MaterialAl or InvarAlAl
Cable length**2m

*Higher load on request

**Higher length on request

EUROPE : 9:00 am - 6:30 pm
USA : 7:00 am - 4:00 pm (CST)

Advices & after-sales service

Demo product on request