The WP2.800 is an XY piezostage designed for fast scanning of large area, up to 800µm x 800µm. It provides a 128.5 mm by 86.5 mm opening that accepts directly any multi-well microplates with an SBS Standard 127.5 x 85 mm (5″ x 3 1/3”) footprint, for example, the 96-well microplate.
As an option, universal sample holder, rotary slide holders or Petri dish holder can be provided.
|X, Y :
- 800 µm
The C3.100 has been specifically designed for offering 100µm travel range in a compact design. This stage is also available in 2 axis version (C2.100) but also in 1-axis version either with X axis (CX.100) or Z axis (CZ.100).
Because of its attractive price and high performances, this stage has received an overwhelming success in the German laser marking industry immediately when it was launched.
|X, Y, Z :
- 100 µm
The FOCHS.100 is a tubular design piezotage dedicated to microscope objective high speed nanopositioning. It is offered with 100 microns of travel. The FOCHS.100 is used in a wide range of applications : Z-stack, laser machining, autofocusing. It can work also together with automated focus stabilisation devices (for example, CRISP from ASI Imaging). It is made from aluminium, steel and brass. It is equipped with sensor offering stability in the picometer level.
- 100 µm
The LT-Z is a Z stage offering range up to 500 µm. It provides a 128.5 mm by 86.5 mm opening that accepts directly any multi-well microplates with an SBS Standard 127.5 x 85 mm (5" x 3 1/3”) footprint, for example, the 96-well microplate.
This piezostage can be proposed with a coarse positioning Microstage (See our Hybrid System).
On request, the LT-Z can be offered in incubator versions.
- 100 µm
- 200 µm
- 300 µm
- 500 µm
The HS1 family welcomes two new members :
- A faster HS1.10 (10 µm travel range with 7kHz resonance frequency);
- A longer travel range HS1.100 (100 µm travel range).
- 10 µm
- 100 µm
The SLR.1500 is the longest travel range (1500 microns) piezostage that we offer in our product line.
In comparison to other system, this stage is exceptionally reliable due to a totally frictionless assembly.
It can be combined to form 2 or even 3-axis nanopositioning systems.
- 1 500 µm
We recently launched a new controller that can control up to 3 axis and which has advanced scanning capabilities.
The SPM3 stage is a 3-axis ultra-high speed nanopositioner, offering a travel range of 75µm along X and Y with resonant frequencies higher than 2kHz on both axis.
The Z portion of the SPM3 stage can have up to 50µm travel range and offers the highest speed capabilities available on the market since it can have up to 12.5kHz resonnant frequency...
- 75 µm
- 5 µm
The Z-stage is a compact Z direct-drive nanopositioner which has high speed capabilities. It can be combined with a 2 axis nanopositioner which has a 66x66 mm aperture (LT2/LFHS2) or with an assembly of 2 compact HS1 Aperture. The Z stage can be offered with either 5, 10, 25 or 50µm range of motion.
This nanopositioner is part of our high-speed product line (High power controller available).
- 5 µm
Newsletter September 24, 2015
To see our newsletter online click on this link.
We launched recently a very compact controller that can work with any of our 1-axis stage.
It offers three ways of controls that can be used simultaneaously :
- PC control via our USB interface (see below)
- Voltage control (0-10V, -5V/+5V, or -10V/+10V)
- Manual control via a 10-turns potentiomete
222mm (W) X 226mm (D) x 75mm (H)
Our new PiezoInsert has been specifically designed for direct retrofit of existing stages from the following third party manufacturers :
- ASI Imaging
The PiezoInsert can hold directly Multi-Well Plates and with the appropriate sample holder, it can also hold also microscope slides, Petri dishes, Coverslips. It is also compatible with most of the environmental chambers available on the market (Digital Pixel, Tokai Hit, ...).
- 100 µm