Z-INSERT NIKON

The Z-INSERT NIKON is a special version of the Z-INSERT that can fit into a NIKON Ti XY motorized stage.

Its K-type standard opening (160 x 110 mm) is compatible with our K-Type sample holders



  • Features :

    • Travel range up to 500 µm
    • Low profile for easy integration
    • Closed loop control
    • Silicon sensor technology
    • Less than 50pm noise floor

    Applications :

    • Z-stack
    • Autofocus system
    • Confocal microscopy
    • Super resolution microscopy
    • Biotechnology
  • 1 axis Contoller mini1 Axis Controller
    Our Z-INSERT will be used with a 1 axis controller but it may be used with ASI Imaging Controllers
    SH-160110-UNIVERSALK-Type Sample Holders
    See the available sample holders for the Z-INSERT NIKON
  • downloadTechnical Drawing
    Z-INSERT NIKON dimensions
    Download
    PDF -
    41 Ko

 Specifications 
Z-INSERT NIKON.100Z-INSERT NIKON.200Z-INSERT NIKON.300Z-INSERT NIKON.500Unit
Range of motion Z100200300500µm
Resolution Z0.10.20.30.5nm
Typical noise floor Z0.010.020.030.05nm
Full range repeatability Z0.20.40.61nm
Linearization Z
(typical)
0.02%0.02%0.02%0.02%
Resonant frequency Z450350300200Hz
Stiffness Z0.60.50.40.25N/µm
Maximum Load* :
- horizontal use1kg
- vertical use0,5kg
SensorSilicon HR sensor
Size W x L x H236 x 155 x 18.6mm
MaterialAl
Cable length**2m
ControllerStandard

*Higher load on request

** Higher length on request


EUROPE : 9:00 am - 6:30 pm
USA : 7:00 am - 4:00 pm (CST)

Advices & after-sales service

Demo product on request