TT1.5

The TT 1 is a 1-axis stage (Theta) with a range of motion  of either 5 or 10mrad. The TT1 is the ideal tool for applications where an optical beam steering is necessary. This makes this high-speed stage a best-seller for applications such as : particle tracking, optical tweezer, beam stabilization and scanning microscopy.

This nanopositioner is part of our high-speed product line (High power controller available). When used with the high Power controller, high speed scan at 500Hz and step response time smaller than 2ms are possible.

————————————————————–


  • Features :

    • Ultra high speed
    • 5 mrad Θ
    • Closed loop control
    • Silicon sensor technology
    • Less than 1nrad noise floor

    Applications :

    • Beam stabilization
    • Particle tracking
    • Fast beam steering
    • Confocal microscopy
    • Optical tweezer
    • TERS
  • 1 axis Contoller1 Axis Controller
    Our 1 axis PiezoStage will be used with a 1 axis controller standard or high speed
    Adapter plate for HS1 and TT2Adapter Plate
    This adapter plate allows to mount the TT1.5 on all parts with 25mm-spaced M6-tapped holes
  • downloadTechnical Drawing
    TT1.5 Piezostage dimensions
    Download
    PDF -
    393 Ko

————————————————————————————————————
Specifications :

Unit TT1.5   TT1.10
Range of motion (mrad)  5  5
Resolution (µrad)  0,005  0,01
Typical noise floor (µrad)  0,0005   0,001
Full range repeatability (µrad)  0,01  0,02
Linearization (typical)   0,02%   0,02%
Resonant frequency (Hz) 2000  1200
Stiffness (N/µm)  N/A   N/A
Maximum load* :
 – horizontal use (kg) 0,5   0,5
 – vertical use (kg) 0,2   0,2
Sensor  Silicon HR sensor   Silicon HR sensor
Size W x L x H (mm) 51 x 63,5 x 17,8  51 x 63,5 x 17,8
Material Al   Al
Cable length (m)  2   2
Controller   Standard or High Speed   Standard or High Speed

*Higher load on request


EUROPE : 9:00 am - 6:30 pm
USA : 7:00 am - 4:00 pm (CST)

Advices & after-sales service

Demo product on request