LTZ

The LTZ is a flat bottom Z stage allowing travel ranges up to 500 µm.  Its 128.5 mm by 86.5 mm opening fits any multi-well microplates with an SBS Standard 127.5 x 85 mm footprint (5″ x 3 1/3”) (e.g. 96-well microplate). Because of its very low profile (19.3 mm), this nanopositioner is easy to integrate into an inverted microscope and is available with a coarse positioning stage (see our Hybrid System).

As an option, universal sample holders, rotary slide holders or Petri dish holders can be provided.

On request, like the Z-insert, the LTZ can be equiped with an environmental chamber.


  • LT-Z standard
  • LT-Z incubator

  • Features :

    • Travel range up to 500 µm
    • Low profile for easy integration
    • Closed loop control
    • Silicon sensor technology
    • Less than 50pm noise floor

    Applications :

    • Z-stack
    • Autofocus system
    • Confocal microscopy
    • Super resolution microscopy
    • Biotechnology
  • downloadTechnical Drawing
    Z-INSERT STANDARD dimensions
    Download
    PDF -
    518 Ko


 Specifications 
LTZ.100LTZ.200LTZ.300LTZ.500Unit
Range of motion Z100200300500µm
Resolution Z0.10.20.30.5nm
Typical noise floor Z0.010.020.030.05nm
Full range repeatability Z0.20.40.61nm
Linearization Z 0.02%0.02%0.02%0.02%(typical)
Resonant frequency Z500400350250Hz
Stiffness Z0.60.50.40.25N/µm
Maximum Load* :
- horizontal use1kg
- vertical use0.5kg
SensorSilicon HR sensor
Size W x L x H218.5 x 148 x 19.3mm
MaterialAl
Cable length**2m
ControllerStandard

*Higher load on request

**Higher length on request


EUROPE : 9:00 am - 6:30 pm
USA : 7:00 am - 4:00 pm (CST)

Advices & after-sales service

Demo product on request