LF1

 The LF1 is a compact 1-axis piezostage with a 66mm square aperture and with a travel range of either 100μm, 200µm or 300µm. It is recommended when low-footprint and an aperture are needed. The LF1 can be stacked (see the 2-axis model LF2), and completed with an integrated 50µm travel range along the Z axis if needed (see the 3-axis model LF3).

This piezostage can be combined with a coarse positioning Microstage (See our Hybrid System).



  • Features :

    • Square aperture (66 x 66 mm)
    • 100, 200 or 300 µm motion
    • Closed loop control
    • Silicon sensor technology
    • Less than 30pm noise floor

    Applications :

    • Super resolution microscopy
    • Nanolithography
    • Particle tracking
    • Confocal microscopy
  • 1 axis Contoller1 Axis Controller
    The LF1 will be used with a 1 axis controller
    MANUAL-STAGE+LF-1Hybrid system
    The LF1 can be proposed with a coarse positioning stage
    SH-BOT-SQUARE-LABTEKSquare Sample Holders
    See the different Square Sample holders available for the LF1
    Adaptation plate for 160x110 apertureAdapter Plate
    This adapter plate allows to mount the LF1 on a stages with K-type frame (160mm x 110mm aperture)
  • downloadTechnical Drawing
    LF1 Piezostage dimensions
    Download
    PDF -
    23,8 Ko

 Specifications 
LF1.100LF1.200LF1.300Unit
Range of motion100200300µm
Resolution0.10.20.3nm
Typical noise floor0.010.020.03nm
Full range repeatability0.20.40.6nm
Linearization0.02%0.02%0.02%(typical)
Resonant frequency500400300Hz
Stiffness0.60.50.4N/µm
Maximum Load* :
- horizontal use1kg
- vertical use0.5kg
SensorSilicon HR sensor
Size W x L x H121 x 118 x 13.6mm
MaterialAl
Cable length**2m
ControllerStandard

*Higher load on request

*Higher length on request


EUROPE : 9:00 am - 6:30 pm
USA : 7:00 am - 4:00 pm (CST)

Advices & after-sales service

Demo product on request