The HS1 is a compact nanopositioner which can be combined to form 2 or even 3-axis nanopositioning systems. It is offered with 10, 30, 50, 70 or 100 µm range of motion, it is also available with an aperture (see HS1H).

This nanopositioner is part of our high-speed product line (High power controller available).

HS-1 Face

  • Features :

    • High speed, direct drive
    • Compact design
    • Stackable for XY or XYZ motion
    • 10, 30, 50, 70 or 100 µm motion
    • Closed loop control
    • Silicon sensor technology
    • Less than 10pm noise floor

    Applications :

    • Interferometry
    • Nanolithography
    • 3D polymerisation
    • High speed focusing
    • Adaptative optics
  • 1 axis Contoller mini1, 2 or 3 Axis Controller
    The HS1 will be used with a 1 axis controller but it may be used with a 2 or 3 axis controller for multi axis configuration
    Adapter plate for HS1 and TT2Adapter plate
    This adapter plate offer the possiblility to mount the HS1 on all parts with 25mm-spaced M6 tapped holes
    Angle Bracket for microscope lensAngle bracket
    This angle bracket offer the possibility to mount a microscope objective on the HS1
  • downloadTechnical Drawing
    HS1 Piezostage variable dimensions according to the travel range
    PDF -
    29 Ko
    downloadPiezoConcept Datasheet
    Complet datasheet with variable travel range, specifications, dimensions ...
    PDF -
    143 Ko

Range of motion10305070100(µm)
Typical noise floor0.0010.0030.0050.0070.01(nm)
Full range repeatability0.
Linearization (typical)0.02%
Resonant frequency700040001500(Hz)
Maximum load * :
- horizontal use1(kg)
- vertical use0,5(kg)
SensorSilicon HR sensor
Size W x L x H62.5 x 69.5 x 12.662.5 x 89.5 x 12.662.5 x 113.5 x 12.6(mm)
Cable length **2(m)
ControllerStandard or High Speed

*Higher load on request

**Higher lenght on request

Exemple of use:

HS1 on a RAMM HS-2.30
 An assembly of two HS1.30 (2axis)
HS-1.30 Equerre
 HS1.70 on a RAMM microscope  HS1.30 with bracket for high speed focusing

EUROPE : 9:00 am - 6:30 pm
USA : 7:00 am - 4:00 pm (CST)

Advices & after-sales service

Demo product on request