CZ

The CZ is a 1-axis compact Z nanopositioner, offering 100 μm or 200 µm motion along Z. Its compact design makes it the ideal tool for applications such as 3D imaging, Z-stack, autofocus and laser writing application.

It is also available with a X-Y axis if needed (see the 3-axis model C3).

Features & Applications
Related Product
Downloads

Features :
- Compact design
- 100 µm or 200 µm Z motion
- Closed loop control
- Silicon sensor technology
- Less than 10pm noise floor
Applications :
- Alignment
- Laser writing
- 2 photons polymerisation
- Confocal microscopy
- 3D printer
1 Axis Controller
Our 1 axis PiezoStage will be used with a 1 axis controller standard or high speed
Technical Drawing
C-Z.100 Piezostage dimensions Download
PDF -
149 Ko

	Specifications

	CZ.100	CZ.200	Unit
Range of motion Z	100	200	µm
Resolution Z	0.1	0.2	nm
Typical noise floor Z	0.01	0.02	nm
Full range repeatability Z	0.2	0.4	nm
Linearization Z (typical)	0.02%	0.02%
Resonant frequency Z	500	400	Hz
Stiffness X / Y / Z	0.6	0.4	N/µm
Maximum Load* :
- horizontal use	0.5		kg
- vertical use	0.1		kg
Sensor	Silicon HR sensor
Size W x L x H	48.5 x 48.5 x 25.7		mm
Material	Al
Cable length**	2		m
Controller	Standard

*Higher load on request

**Higher length on request