CX

The CX.100 is an inexpensive compact linear nanopositioner, offering 100 μm or 200µm motion along X. Its compact design makes it the ideal tool for many photonics and fiber positioning applications.

It can be also proposed with a Y or Y-Z axis if required (see the 2-axis model C2 and 3-axis model C3).

——————————————————————-


  • Features :

    • Compact design
    • 100 µm or 200 µm X motion
    • Closed loop control
    • Silicon sensor technology
    • Less than 10pm noise floor

    Applications :

    • Alignment
    • Laser writing
    • 2 photons polymerisation
    • Confocal microscopy
    • 3D printer
  • 1 axis Contoller1 Axis Controller
    Our 1 axis PiezoStage will be used with a 1 axis controller standard or high speed
  • downloadTechnical Drawing
    C-X.100 Piezostage dimensions
    Download
    PDF -
    135 Ko

————————————————————————————————————
Specifications :

 Specifications 
CX.100CX.200Unit
Range of motion X100200µm
Resolution X0,10,2nm
Typical noise floor X0,010,02nm
Full range repeatability X0,20,4nm
Linearization X
(typical)
0,02%0,02%
Resonant frequency X400300Hz
Stiffness X0,30,2N/µm
Maximum Load* :
- horizontal use0,5kg
- vertical use0,1kg
SensorSilicon HR sensor
Size W x L x H48,5 x 48,5 x 21,3mm
MaterialAl
Cable length**2m
ControllerStandard

*Higher load on request

**Higher length on request


EUROPE : 9:00 am - 6:30 pm
USA : 7:00 am - 4:00 pm (CST)

Advices & after-sales service

Demo product on request